Corrugated boxes · FEFCO 0201
18 × 18 × 18 in regular slotted container dieline
This dieline was generated at exactly 18 × 18 × 18 in (457.2 × 457.2 × 457.2 mm) by the same structural engine that produces our factory print files — every panel, flap and glue zone computed for this size, not stretched from a template. Need a different size? This construction runs in standard stock sizes — pick the nearest one in the studio.
What fits in 18 × 18 × 18 in
Freight-scale: bulk shippers and case packs, where cube and stacking strength matter more than shelf presence.
Shipping note: carriers bill the greater of actual and dimensional weight. At 18 × 18 × 18 in the dimensional weight is about 42 lb (US domestic divisor 139), so if your product is lighter than that, the box size — not the product — is setting your freight cost.
Design on this 18 × 18 × 18 in dieline
Put AI artwork on the true structure at your exact size — then order it manufactured, one company end to end.
Start designing freeorGenerate a custom size18 × 18 × 18 in regular slotted container — questions people ask
What are the actual dimensions of a 18 × 18 × 18 in regular slotted container?
18 × 18 × 18 in is the FINISHED internal size — the space your product actually occupies. Flat, before folding, the die measures 1864 × 913 mm (73.38" × 35.94"), which is the sheet size a printer needs to quote the job. That works out to 5832 cubic inches (95.57 litres) of internal capacity.
What is the dimensional weight of a 18 × 18 × 18 in box?
About 42 lb at the US domestic divisor of 139. Carriers bill whichever is greater — actual weight or dimensional weight — so for anything light and bulky this is the number that sets your shipping cost. Dropping a dimension by an inch is often cheaper than negotiating a rate.
Can I get a 18 × 18 × 18 in regular slotted container custom printed?
Yes. Design it free on this exact dieline — the artwork lands on the real structure, not a mockup — and runs start at 100 units. You can also export the print-ready file and take it to any printer; the construction is FEFCO 0201, so any converter will recognise it.