Dielines

Packaging dielines that are actually manufacturable

Every packaging dieline below is generated live by the same structural engine that produces our factory print files — real fold lines, real cut lines, real glue flaps, real dimension callouts. Pick a category, pick a construction, then type your exact size and watch the die redraw. Not clip-art templates: the preview you see is what our own factory cuts, scores and glues.

35 constructions across 6 categories · every preview is watermarked · production SVG/PDF with bleed exports from the studio on a paid plan · or generate any size now →

Folding cartons · 8 constructions

Paperboard cartons built to real ECMA constructions — tuck ends, crash-lock bottoms, snap-locks and sleeves, with every glue flap and dust flap placed where production needs it.

BACKFRONTRIGHTLEFTGLUETOPBOTTOMStraight Tuck End (STE) — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 250×226 · art+bleed 256×232 (3mm/side) · box 80×120×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Straight Tuck End (STE)
Straight Tuck End
Open & scale to your size →
BACKFRONTRIGHTLEFTGLUETOPBOTTOMReverse Tuck End (RTE) — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 250×226 · art+bleed 256×232 (3mm/side) · box 80×120×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Reverse Tuck End (RTE)
Reverse Tuck End
Open & scale to your size →
BACKFRONTRIGHTLEFTGLUETOPGLUEGLUEAuto-Bottom (Crash Lock) — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 250×204 · art+bleed 256×210 (3mm/side) · box 80×120×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Auto-Bottom (Crash Lock)
Auto-Bottom Tuck-Top folding carton
Open & scale to your size →
BACKFRONTRIGHTLEFTGLUETOPGLUEGLUETuck Top Auto-Bottom — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 250×204 · art+bleed 256×210 (3mm/side) · box 80×120×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Tuck Top Auto-Bottom
Tuck Top Auto-Bottom folding carton
Open & scale to your size →
BACKFRONTRIGHTLEFTGLUEGLUETOPGLUEBOTTOMSeal End — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 250×199 · art+bleed 256×205 (3mm/side) · box 80×120×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Seal End
Seal End folding carton
Open & scale to your size →
BACKFRONTRIGHTLEFTGLUETOP1-2-3 Snap-Lock Bottom — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 250×202 · art+bleed 256×208 (3mm/side) · box 80×120×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
1-2-3 Snap-Lock Bottom
1-2-3 Snap-Lock Bottom folding carton
Open & scale to your size →
BACKFRONTRIGHTLEFTGLUEOpen-Band Sleeve — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 252×120 · art+bleed 258×126 (3mm/side) · box 80×120×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Open-Band Sleeve
open-band sleeve carton
Open & scale to your size →
BACKFRONTRIGHTLEFTGLUETOPBOTTOMHANGERHANGER-OUTERFive-Panel Hanger — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 250×236 · art+bleed 256×242 (3mm/side) · box 80×150×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Five-Panel Hanger
Five-Panel Hanger folding carton
Open & scale to your size →

Mylar pouches & bags · 8 constructions

True pouch webs — real gussets, seal zones and zipper lines, drawn flat the way the film converter runs them. Manufactured runs start at just 100 units — most bag suppliers won't quote you under 3,000.

SIDE SEALSIDE SEALTOP SEALTOP SEALBOTTOM SEALBOTTOM SEALFRONTBACKPIECE 1 of 2 - 80x120 mmPIECE 2 of 2 - 80x120 mmFlat 3-Side-Seal Pouch — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 176×120 · art+bleed 182×126 (3mm/side) · box 80×120TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Flat 3-Side-Seal Pouch
flat 3-side-seal mylar pouch
Open & scale to your size →
SIDE SEALSIDE SEALTOP SEALTOP SEALBOTTOM SEALBOTTOM SEALPRESS-TO-CLOSE ZIPPERPRESS-TO-CLOSE ZIPPERFRONTBACKPIECE 1 of 2 - 80x120 mmPIECE 2 of 2 - 80x120 mmLay-Flat Zipper Pouch — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 176×120 · art+bleed 182×126 (3mm/side) · box 80×120TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Lay-Flat Zipper Pouch
lay-flat zipper mylar pouch
Open & scale to your size →
SIDE SEALSIDE SEALSIDE SEALSIDE SEALTOP SEALTOP SEALPRESS-TO-CLOSE ZIPPERPRESS-TO-CLOSE ZIPPERFRONTBACKBASE-GUSSETPIECE 1 of 3 - 130x200 mmPIECE 2 of 3 - 130x200 mmPIECE 3 of 3 - 130x45 mmStand-Up Pouch — sample 130×200×40 mmTWOFORM · production dieline · units = mm · flat 276×245 · art+bleed 282×251 (3mm/side) · box 130×200×27TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Stand-Up Pouch
stand-up mylar pouch
Open & scale to your size →
SIDE SEALSIDE SEALSIDE SEALSIDE SEALTOP SEALTOP SEALSPOUT WELD (FITMENT)SPOUT WELD (FITMENT)FRONTBACKBASE-GUSSETPIECE 1 of 3 - 130x200 mmPIECE 2 of 3 - 130x200 mmPIECE 3 of 3 - 130x45 mmSpout Pouch — sample 130×200×40 mmTWOFORM · production dieline · units = mm · flat 276×245 · art+bleed 282×251 (3mm/side) · box 130×200×27TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Spout Pouch
spout pouch
Open & scale to your size →
BACK-CENTRE SEAMBACK-CENTRE SEAMTOP SEALTOP SEALTOP SEALTOP SEALTOP SEALTOP SEALTOP SEALPINCH-BOTTOM SEALPINCH-BOTTOM SEALPINCH-BOTTOM SEALPINCH-BOTTOM SEALPINCH-BOTTOM SEALPINCH-BOTTOM SEALPINCH-BOTTOM SEALBACK-HALF-LEFTGUSSET-LGUSSET-L-INNERFRONTGUSSET-RGUSSET-R-INNERBACK-HALF-RIGHTSide-Gusset Coffee Bag — sample 100×260×60 mmTWOFORM · production dieline · units = mm · flat 330×260 · art+bleed 336×266 (3mm/side) · box 100×260×60TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Side-Gusset Coffee Bag
side-gusset coffee-bag
Open & scale to your size →
CORNER SEALCORNER SEALCORNER SEALCORNER SEALCORNER SEALCORNER SEALCORNER SEALCORNER SEALTOP SEALTOP SEALTOP SEALTOP SEALTOP SEALTOP SEALBOTTOM PERIMETER SEALBOTTOM PERIMETER SEALBOTTOM PERIMETER SEALBOTTOM PERIMETER SEALBOTTOM PERIMETER SEALBOTTOM PERIMETER SEALBOTTOM PERIMETER SEALBOTTOM PERIMETER SEALBOTTOM PERIMETER SEALBOTTOM PERIMETER SEALPRESS-TO-CLOSE ZIPPERPRESS-TO-CLOSE ZIPPERFRONTGUSSET-RGUSSET-R-INNERBACKGUSSET-LGUSSET-L-INNERBOX-BOTTOMFlat-Bottom Bag — sample 120×250×70 mmTWOFORM · production dieline · units = mm · flat 380×320 · art+bleed 386×326 (3mm/side) · box 120×250×70TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Flat-Bottom Bag
flat-bottom mylar bag
Open & scale to your size →
CORNER SEALCORNER SEALCORNER SEALCORNER SEALCORNER SEALCORNER SEALCORNER SEALCORNER SEALTOP SEALTOP SEALTOP SEALTOP SEALTOP SEALTOP SEALBOTTOM SEALBOTTOM SEALBOTTOM SEALBOTTOM SEALBOTTOM SEALBOTTOM SEALPRESS-TO-CLOSE ZIPPERPRESS-TO-CLOSE ZIPPERFRONTGUSSET-RGUSSET-R-INNERBACKGUSSET-LGUSSET-L-INNERQuad-Seal Bag — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 240×120 · art+bleed 246×126 (3mm/side) · box 80×120×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Quad-Seal Bag
quad-seal mylar bag
Open & scale to your size →
TOP END SEALTOP END SEALTOP END SEALBOTTOM END SEALBOTTOM END SEALBOTTOM END SEALGLUEBACK-HALF-LFRONTBACK-HALF-RGLUEPillow Back-Seal Pouch — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 180×120 · art+bleed 186×126 (3mm/side) · box 80×120TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Pillow Back-Seal Pouch
pillow back-seal snack bag
Open & scale to your size →

Corrugated boxes · 8 constructions

Corrugated shippers carrying their genuine FEFCO codes, straight from the engine's construction map — scores, slots and flap geometry to the standard, not renamed clip-art.

FRONTRIGHTBACKLEFTGLUEBOTTOMBOTTOMTOPTOPRegular Slotted Container — sample 250×200×180 mmTWOFORM · production dieline · units = mm · flat 895×379 · art+bleed 901×385 (3mm/side) · box 250×200×180TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Regular Slotted Container · FEFCO 0201
corrugated Regular Slotted Container
Open & scale to your size →
FRONTRIGHTBACKLEFTGLUEBOTTOMBOTTOMHalf-Slotted Container — sample 250×180×180 mmTWOFORM · production dieline · units = mm · flat 895×269 · art+bleed 901×275 (3mm/side) · box 250×180×180TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Half-Slotted Container · FEFCO 0200
corrugated Half-Slotted Container
Open & scale to your size →
FRONTRIGHTBACKLEFTGLUEBOTTOMBOTTOMTOPTOPFull-Overlap Container — sample 250×160×180 mmTWOFORM · production dieline · units = mm · flat 895×517 · art+bleed 901×523 (3mm/side) · box 250×160×180TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Full-Overlap Container · FEFCO 0203
corrugated Full-Overlap container
Open & scale to your size →
BOTTOMFRONTBACKLEFTRIGHTTOPDie-Cut Mailer Box — sample 240×80×160 mmTWOFORM · production dieline · units = mm · flat 557×554 · art+bleed 563×560 (3mm/side) · box 240×80×160TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Die-Cut Mailer Box · FEFCO 0427
corrugated die-cut mailer
Open & scale to your size →
BASE-INNERLEFTRIGHTBACKTOPFRONTBOTTOMOne-Piece Folder — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 367×554 · art+bleed 373×560 (3mm/side) · box 80×120×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
One-Piece Folder · FEFCO 0400
corrugated one-piece folder
Open & scale to your size →
BOTTOMFRONT-INNERBACKTOPFRONTRIGHTLEFTFive-Panel Folder — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 437×317 · art+bleed 443×323 (3mm/side) · box 80×120×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Five-Panel Folder · FEFCO 0410
corrugated five-panel folder
Open & scale to your size →
BOTTOMFRONTBACKRIGHTLEFTDie-Cut Tray — sample 300×60×220 mmTWOFORM · production dieline · units = mm · flat 540×340 · art+bleed 546×346 (3mm/side) · box 300×60×220TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Die-Cut Tray · FEFCO 0422
corrugated die-cut tray
Open & scale to your size →
BOTTOMFRONTBACKRIGHTLEFTTOPLID-SKIRT-FLID-SKIRT-BLID-SKIRT-LLID-SKIRT-RPIECE 1 of 2 - 324x284 mmPIECE 2 of 2 - 320x280 mmTelescoping Two-Piece — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 670×284 · art+bleed 676×290 (3mm/side) · box 80×120×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Telescoping Two-Piece
corrugated telescoping two-piece
Open & scale to your size →

Shipping bags · 2 constructions

Poly and paper mailers with real seal and lip geometry, drawn to the converter's real web. Manufactured runs start at just 100 units — most bag suppliers won't quote you under 3,000.

SIDE WELDSIDE WELDSIDE WELDSIDE WELDBOTTOM WELDBOTTOM WELDPERMANENT SELF-SEAL ADHESIVEPEEL STRIP / RELEASE LINERCOVERED BY THE SEALED FLAPFRONTSEAL-FLAPBACKPIECE 1 of 2 - 254x370 mmPIECE 2 of 2 - 254x330 mmPoly Mailer — sample 254×330 mmTWOFORM · production dieline · units = mm · flat 524×370 · art+bleed 530×376 (3mm/side) · box 254×330TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Poly Mailer
poly mailer shipping envelope
Open & scale to your size →
SIDE WELDSIDE WELDSIDE WELDSIDE WELDBOTTOM WELDBOTTOM WELDPERMANENT SELF-SEAL ADHESIVEPEEL STRIP / RELEASE LINERCOVERED BY THE SEALED FLAPFRONTSEAL-FLAPBACKPIECE 1 of 2 - 216x320 mmPIECE 2 of 2 - 216x280 mmBubble Mailer — sample 216×280 mmTWOFORM · production dieline · units = mm · flat 448×320 · art+bleed 454×326 (3mm/side) · box 216×280TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Bubble Mailer
bubble / padded mailer
Open & scale to your size →

Rigid setup boxes · 5 constructions

Two-piece setup boxes, magnetic closures, drawer-slides and book-styles — wrap dielines with the turn-in allowances and corner geometry a rigid box maker needs.

BOTTOMFRONTBACKLEFTRIGHTTOPLID-WALL-FLID-WALL-BLID-WALL-LLID-WALL-RPIECE 1 of 2 - 294x254 mmPIECE 2 of 2 - 237x197 mmTwo-Piece Rigid Box — sample 150×60×110 mmTWOFORM · production dieline · units = mm · flat 561×254 · art+bleed 567×260 (3mm/side) · box 150×60×110TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Two-Piece Rigid Box
rigid two-piece setup box
Open & scale to your size →
HIDDEN MAGNETHIDDEN MAGNETHIDDEN MAGNETHIDDEN MAGNETBASE-INNERFRONT-INNERBACKLEFTRIGHTBOTTOMCOVER-BACKTOPFRONTPIECE 1 of 2 - 384x334 mmPIECE 2 of 2 - 222x464 mmMagnetic-Closure Box — sample 200×80×150 mmTWOFORM · production dieline · units = mm · flat 636×464 · art+bleed 642×470 (3mm/side) · box 200×80×150TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Magnetic-Closure Box
rigid magnetic-closure box
Open & scale to your size →
RIBBON PULLDRAWER-INNERDRAWER-PULL-ENDDRAWER-REAR-ENDDRAWER-SIDE-LDRAWER-SIDE-RFRONTRIGHTBACKLEFTGLUETOPPIECE 1 of 2 - 266x212 mmPIECE 2 of 2 - 170x210 mmDrawer / Slide Box — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 466×212 · art+bleed 472×218 (3mm/side) · box 80×120×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Drawer / Slide Box
rigid drawer / slide box
Open & scale to your size →
BASE-INNERFRONTBACK-INNERLEFTRIGHTBOTTOMBACKTOPINSIDEPIECE 1 of 3 - 344x304 mmPIECE 2 of 3 - 105x216 mmPIECE 3 of 3 - 84x44 mmBook-Style Box — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 593×304 · art+bleed 599×310 (3mm/side) · box 80×120×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Book-Style Box
rigid book-style box
Open & scale to your size →
BOTTOMFRONTBACKLEFTRIGHTNECK-PLATFORMNECK-WALL-FNECK-WALL-BNECK-WALL-LNECK-WALL-RTOPLID-WALL-FLID-WALL-BLID-WALL-LLID-WALL-RPIECE 1 of 3 - 335x295 mmPIECE 2 of 3 - 248x208 mmPIECE 3 of 3 - 203x163 mmShoulder-Neck Box — sample 80×120×40 mmTWOFORM · production dieline · units = mm · flat 846×295 · art+bleed 852×301 (3mm/side) · box 80×120×40TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Shoulder-Neck Box
rigid shoulder-neck box
Open & scale to your size →

Labels · 4 constructions

Die-cut label shapes with true cut contours and bleed — rectangles, rounded corners, ovals and custom silhouettes, sized to your web.

FRONTRectangle Label — sample 80×50 mmTWOFORM · production dieline · units = mm · flat 80×50 · art+bleed 83×53 (1.5mm/side) · box 80×50TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Rectangle Label
flat rectangular adhesive label
Open & scale to your size →
FRONTRounded-Corner Label — sample 80×50 mmTWOFORM · production dieline · units = mm · flat 80×50 · art+bleed 83×53 (1.5mm/side) · box 80×50TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Rounded-Corner Label
flat rounded-corner adhesive label
Open & scale to your size →
FRONTCircle Label — sample 60×60 mmTWOFORM · production dieline · units = mm · flat 60×60 · art+bleed 63×63 (1.5mm/side) · box 60×60TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Circle Label
flat circular adhesive label
Open & scale to your size →
FRONTOval Label — sample 80×50 mmTWOFORM · production dieline · units = mm · flat 80×50 · art+bleed 83×53 (1.5mm/side) · box 80×50TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Oval Label
flat oval adhesive label
Open & scale to your size →

How to get a manufacturable packaging dieline

  1. 1. Bring it or brief Sam

    Upload a design from ChatGPT, Midjourney or your own designer — or brief Sam, our in-house AI packaging designer, from scratch.

  2. 2. Sam creates options

    You get up to 4 real concepts, already mapped onto your true production dieline. Not mockups — the real structure.

  3. 3. Choose your favorite

    Pick the direction you love. Every fold, panel, bleed and safe zone is already correct.

  4. 4. Fine-tune it

    Final edits open up. Adjust anything with Sam until it feels unmistakably yours.

  5. 5. Place your exact assets

    Drop in your real barcodes, QR codes, nutrition and legal copy — placed by you, pixel-perfect, untouched by AI.

  6. 6. Approve it on screen & order

    The live preview is your proof — what you see is the production file. Approve it by ordering, and it goes straight to our factory, print-ready, and ships to your door.

Dieline questions, answered straight

Are these dielines actually print-ready?

Yes — they're generated by the same structural engine that builds our factory print files, with real cut lines, fold lines, glue flaps and dimension callouts. The watermarked previews here are for viewing; the production SVG/PDF (with bleed) exports from the studio on a paid plan.

Do the constructions follow ECMA and FEFCO standards?

Our folding cartons are built to ECMA constructions, and our corrugated styles carry their real FEFCO codes — 0200, 0201, 0203, 0400, 0410, 0422 and 0427 — straight from the engine's construction map, not renamed clip-art.

Can I get a dieline in my exact size?

For folding cartons, pouches, labels and mailer bags, yes: open any dieline above and type your real width, height and depth — the die redraws on the spot, panels, flaps, gussets and glue zones recalculated rather than stretched. Corrugated boxes and rigid setup boxes come in standard stock sizes instead, because corrugated is cut from fixed board widths and rigid boxes are built on fixed tooling. Across the whole library that comes to over 500,000 buildable dielines.

What's different from free dieline template sites?

A template site gives you a fixed drawing and wishes you luck at the printer. Here the dieline, the AI artwork on it, and the manufacturing are one pipeline from one company — so the file you approve is the package that ships.

See your package on a real dieline in minutes

Pick a construction, type your size, and design with AI on the true production structure — then order it manufactured.

Start designing free