Folding cartons

3 × 2 × 5 in straight tuck end (ste) dieline

This dieline was generated at exactly 3 × 2 × 5 in (76.2 × 127.0 × 50.8 mm) by the same structural engine that produces our factory print files — every panel, flap and glue zone computed for this size, not stretched from a template. Need a different size? Type any dimensions in the studio and it redraws for them.

BACKFRONTRIGHTLEFTGLUETOPBOTTOMStraight Tuck End (STE) — 3 × 2 × 5 inTWOFORM · production dieline · units = mm · flat 267×262 · art+bleed 273×268 (3mm/side) · box 76×127×51TWOFORM · LINE KEY — red solid = CUT · blue dash = FOLD/crease · magenta dash = BLEED (art runs to here) · grey dash = SAFE area · green hatch = GLUE · purple dash = fabrication (seals/zipper) · black = registration
Generated at 3 × 2 × 5 in — watermarked preview. The production SVG/PDF with bleed and glue flaps exports from the studio on a paid plan.
Finished size
3 × 2 × 5 in (76.2 × 127.0 × 50.8 mm)
Flat blank
267 × 262 mm (10.52" × 10.32")
Panels in the die
13
Construction
Straight Tuck End
Internal capacity
30 cu in (0.49 L)
Dimensional weight
0.2 lb (US divisor 139)
Typical gauge
Folding boxboard, typically 14–24 pt depending on the weight it carries
Minimum order
100 units

What fits in 3 × 2 × 5 in

One retail unit plus protection — a candle, a mug, a skincare set, a paperback.

Shipping note: carriers bill the greater of actual and dimensional weight. At 3 × 2 × 5 in the dimensional weight is about 0.2 lb (US domestic divisor 139), so if your product is lighter than that, the box size — not the product — is setting your freight cost.

Design on this 3 × 2 × 5 in dieline

Put AI artwork on the true structure at your exact size — then order it manufactured, one company end to end.

Start designing freeorGenerate a custom size

3 × 2 × 5 in straight tuck end (ste) — questions people ask

What are the actual dimensions of a 3 × 2 × 5 in straight tuck end (ste)?

3 × 2 × 5 in is the FINISHED internal size — the space your product actually occupies. Flat, before folding, the die measures 267 × 262 mm (10.52" × 10.32"), which is the sheet size a printer needs to quote the job. That works out to 30 cubic inches (0.49 litres) of internal capacity.

What is the dimensional weight of a 3 × 2 × 5 in box?

About 0.2 lb at the US domestic divisor of 139. Carriers bill whichever is greater — actual weight or dimensional weight — so for anything light and bulky this is the number that sets your shipping cost. Dropping a dimension by an inch is often cheaper than negotiating a rate.

Can I get a 3 × 2 × 5 in straight tuck end (ste) custom printed?

Yes. Design it free on this exact dieline — the artwork lands on the real structure, not a mockup — and runs start at 100 units. You can also export the print-ready file and take it to any printer.

3 × 2 × 5 in in other constructions

Same finished size, different structure — and a different flat blank, panel count and shipping profile.

Reverse Tuck End (RTE)

Other straight tuck end (ste) sizes

2 × 2 × 8 in3 × 2 × 6 in4 × 2 × 6 in4 × 4 × 8 in2 × 1 × 4 in2 × 2 × 4 in2 × 2 × 6 in3 × 1 × 5 in3 × 3 × 6 in3 × 3 × 8 in4 × 3 × 8 in5 × 3 × 8 in5 × 5 × 10 in6 × 4 × 10 inAll about the Straight Tuck End (STE) →