Folding cartons
6 × 4 × 10 in straight tuck end (ste) dieline
This dieline was generated at exactly 6 × 4 × 10 in (152.4 × 254.0 × 101.6 mm) by the same structural engine that produces our factory print files — every panel, flap and glue zone computed for this size, not stretched from a template. Need a different size? Type any dimensions in the studio and it redraws for them.
What fits in 6 × 4 × 10 in
The everyday e-commerce size: apparel, a small electronics bundle, a two-to-three item subscription box.
Shipping note: carriers bill the greater of actual and dimensional weight. At 6 × 4 × 10 in the dimensional weight is about 1.7 lb (US domestic divisor 139), so if your product is lighter than that, the box size — not the product — is setting your freight cost.
Design on this 6 × 4 × 10 in dieline
Put AI artwork on the true structure at your exact size — then order it manufactured, one company end to end.
Start designing freeorGenerate a custom size6 × 4 × 10 in straight tuck end (ste) — questions people ask
What are the actual dimensions of a 6 × 4 × 10 in straight tuck end (ste)?
6 × 4 × 10 in is the FINISHED internal size — the space your product actually occupies. Flat, before folding, the die measures 526 × 500 mm (20.71" × 19.7"), which is the sheet size a printer needs to quote the job. That works out to 240 cubic inches (3.93 litres) of internal capacity.
What is the dimensional weight of a 6 × 4 × 10 in box?
About 1.7 lb at the US domestic divisor of 139. Carriers bill whichever is greater — actual weight or dimensional weight — so for anything light and bulky this is the number that sets your shipping cost. Dropping a dimension by an inch is often cheaper than negotiating a rate.
Can I get a 6 × 4 × 10 in straight tuck end (ste) custom printed?
Yes. Design it free on this exact dieline — the artwork lands on the real structure, not a mockup — and runs start at 100 units. You can also export the print-ready file and take it to any printer.